Guide
BER ratings, from A0 to G
New certificates use A0 to G. Older ones keep their original letters until they expire.
A Building Energy Rating is a calculated estimate of how much energy a dwelling should need for heating, hot water, ventilation and lighting, divided by the floor area. The unit is kilowatt-hours per square metre per year. It is not a measurement of last year’s bills. Two households in identical houses can spend very different amounts.
The scale used on new certificates
From 24 May 2026, new BER certificates use a shorter scale: A0, A, B, C, D, E, F and G. A0 is the most efficient and also has to meet a zero-emission test. G is the least efficient. The numbered sub-labels (A1, A2, A3, B1 and so on) are no longer used on new certificates.
SEAI published the bands with that change. In broad terms they run: A0 up to 42 kWh/m²/year with the zero-emission test, A up to 75, B up to 150, C up to 225, D up to 275, E up to 325, F up to 375, and G above that. Check SEAI’s own page if you are relying on a threshold for a grant or a mortgage, because a printed table can go stale.
Older certificates
A certificate issued before that change stays valid for up to 10 years and keeps the label it was given, including A1 or C3. You do not have to rush out for a new one only because the letters were simplified. You do need a new assessment if the certificate has expired or the building has materially changed: a significant fabric change, an extension, or a different heating system or fuel.
What a rating is not
It is not a structural survey, a valuation, or a promise about next winter’s bill. It is also not, by itself, mortgage advice. Some lenders look at the rating when they price a loan. The criteria are theirs. See green mortgages for that limit in plain language.
Advertisements for sales and lettings still have to show the BER. That part of the rules did not disappear with the new letters. If you need the certificate for an advert, start with selling or letting, then ask Cian for a quote.